The technical information posted here is the content provided at the request of our company by Mr. Kazuo Kawai, who is active as an implementation advisor.
If you have any questions regarding the content posted, please contact us from our website.
After confirming the contents, we will contact Kawai Advisor via our company.
Worked for a solder maker from 1988 to 1995, mainly responsible for measures against freon and development of the European market.
After that, he became independent and was registered as a registered expert of Kyoto Sangyo 21 in 1998.
Since April 2011, he has been a special technical instructor for small and medium-sized enterprises in Kyoto Prefecture.
This is a list of the contents that we have requested and provided by Mr. Kazuo Kawai, an implementation advisor.
If you click the link, you will be taken to the details page, so please have a look.
Please note that some of the materials used in this technical column are in Japanese only.
https://www.antom.co.jp/en/jisso-kawai-movie01/
https://www.antom.co.jp/en/wearable-smt/
https://www.antom.co.jp/en/wearable-smt1/
https://www.antom.co.jp/en/wearable-smt2/
Introducing an example of the problem of soldering fine parts
https://www.antom.co.jp/en/observing-voids/
The technical information posted here was written by Mr. Kazuo Kawai, an implementation advisor, at the request of our company.
If you have any questions regarding the articles listed, please contact Kawai Advisor via our company if you contact us from our website.
Please note that it may take some time to respond depending on the content of your inquiry.